ProductsCondenser & Heat
Exchanger Tube
Expanders Boiler Tube Expanders Tube Rolling Systems Installation Tools Tube Removing Tools Tube Pulling Equipment Tube CleanersTube Tool AccessoriesPneumatic ToolsTest PumpsHoists
All Categories > Tube Tool Accessories 
 

Tube Tool Accessories

 
Click on a category to drill down.

Request Information
PGD-P-p105

Joints and Extensions

TGp108

Tube Guide

 (24)
The Tube Guide consist of a steel, aluminum or plastic tapered head and a replaceable nylon brush, and it's used to guide tubes through the sheets and the tube support plates during tube bundles assembling. The nylon brush fits in the tube end, holding pilot firmly in place.

TP-S-p109

Tube Plugs

 (95)
Ideal for sealing leaky tubes in condenser and heat exchangers. It is recommended to use our ortc one revolution tube cutter to puncture the tube to ensure that pressure cannot build up in the tube and cause the plug to loosen or blow out.

Search 95 Items

TP-P-p109

Two Piece Tube Plugs

Ideal for sealing leaky tubes in condenser and heat exchangers. It is recommended to use our ortc one revolution tube cutter to puncture the tube to ensure that pressure cannot build up in the tube and cause the plug to loosen or blow out.

VLTp111-112

Vacuum Leak Tester KVLD-3000

 (4)
The vacuum leak tester KVLD-3000 is a simple, precise method of testing tubes in boilers, condensers, and heat exchangers. It is the fastest, most accurate means of locating leaky tubes for plugging or replacement.

Powered by compressed air, the vacuum leak detector pulls a vacuum in a tube to a desired reading on a gauge. A steady reading on the gauge would indicate that the tube doesn't leak. If the reading on the gauge drops you have pinpointed the leaking tube.

FEATURES:
  • Only one tool necessary for testing multiple tube sizes.
  • Built-in easy to read vacuum gauge.
  • Muffled exhaust for quiet operation. Lightweight, easy to use.


HOTPp113

Hand Operated Testing Pumps

 (7)
All our hand operated testing pumps are delivered "ready for use" and equipped with:
  • Tank (Except PEM 30)
  • Pressure gauge
  • Drain valve
  • Flexibe hose. 16" long.(3" for PEM 30 / 6" for PEM 40)
The seals used are made for usage with water, fluid oil or gas-oil

TubeHoleGage

Tube Hole Gage

Our Tube Hole Gages utilize a precision three point contact, self centering system, for measuring both Tube and Tube sheet ID. Our Reversible Dial Plate allows the user to measure in both inch/decimal and metric units. Our standard adjustable depth is 4" (101 mm) or 8" (203mm) dependent on model. We offer additional 8" (203mm) reach extensions to increase the capacity of these tools for Fin Fan and similar units.
All gages are furnished with both setting ring and carrying case.
Site created by ThomasNet Web Solutions