Tube Removal Tools on Equipment Group Investments, Ltd

Products

Condenser & Heat
Exchanger Tube
Expanders

Boiler Tube Expanders

Tube Rolling Systems

Installation Tools

Tube Removing Tools

Tube Pulling Equipment

Tube Cleaners

Tube Tool Accessories

Pneumatic Tools

Test Pumps

Hoists


All Categories > Tube Removal Tools


	Tube Removal Tools
	Click on a category to drill down.


		Rhino-508 Pneumatic Boiler Tube Cutter Pneumatic boiler tube cutter RHINO-508 Capacity 28 to 76 mm O.D. (1-1/8" to 3"O.D.)* Very fast (2 min to cut 51 mm O.D. 5 mm wall-carbon steel) Very strong up to 300 Nm output Lightweight - only 9 kg (without cutter) Torque reacting locking system For horizontal and vertical application Speed: 50 to 55 rpm Internal aircooling system (real cold cutting) * Tube cutters and locking mandrels are ordered separately..




		Lever Type Tube Cutters (4) Introducing our new Lever Type Tube Cutters! These tools have been designed to cut both ferrous and nonferrous tubes quickly and effortlessly. The high torque motors combined with our lever assist unit, allow a constant feed rate of the cutting bit. This results in higher productivity and extends the life of the cutter. We offer two types of tool. You can select the PLTC-50 pneumatic tube cutter in either 1250, 600, 400, and 200-150 rpm options.




		PTTC Push Type Tube Cutters Our new PTTC tube cutters (now available form 1/2" up to 4" O.D.) offer new features to make it the most versatile cutter available. The cutter blade depth can be adjusted to allow the tube to be cut through. The cutter blades are made out of HSS that assures long life (when used with proper cutting speed). A single blade is used in cutters from PTTC-82 to PTTC-254. The PTTC-254 is also available with 2 blades. The cutter from PTTC-315 up to PTTC-902 are furnished with two blades. The front pilot mounted under the cutter keeps the cutter in the center of the tube and prevent the cutter to be jammed as the chips must go forward into the tube. Also available as tube trimmer.




		ABTC Automatic Boiler Tube Cutter This Cutter has the same features as the PTTC cutter but has an Automatic Feeding Attachment which makes the cutting process very easy, and by the constant pressure on the cutter bits extend the lifetime of the blades. Now available from 1-1/4" up to 4" O.D.




		ORTC One Revolution Tube Cutter These tools have been designed for cutting both ferrous and non-ferrous tubes that are commonly found in heat exchangers, boilers and condensers. Our standard tool is adjustable from 1" - 6" (25 mm - 155 mm). Longer reach tools are available in 10" (254 mm) increments. The tool is designed to be used with a hand or ratchet wrench only. Impact wrenches should never be used with these tools. The Cutting of the tube is based on the eccentric principle, where the cutter bit moves out to the tube wall as the cutter is rotated. Continued clock wise rotation wil puncture and cut the tube in one revolution. Simply rotating the tool counterclockwise closes the bit and the tool can be removed from the tube.




		Tube Wall Reducing Tool (50) It is a special reamer made out of high speed steel, it has a Morse Taper shank and a centralizing pilot specially grinded according to the tube gauge. These tools are used to reduce the gauge of tube to be removed from the tube sheet. Tubes should be drilled in about 80% of the length of the tube sheet. After the drilling, tube can be removed by the tube drift.




		Tube Drift TD Tube Drifts and CT Collapsing tools, very good tools for quick removal of tube stubs from the tube sheet. For tube 1/2" to 1" O.D. tools are made as standard. Other sizes availbale on request. The tools are equipped with shank 06. The 01 shank and tool with longer reach, 6" available on request. Other sizes, up to 2" available on request.




		Collapsing Tools TD Tube Drifts and CT Collapsing tools, very good tools for quick removal of tube stubs from the tube sheet. For tube 1/2" to V'O.D. tools are made as standard. Other sizes availbale on request. The tools are equipped with shank 06. The 01 shank and tool with reach longer the 6" available on request. Other sizes, up to 2" available on request.




		Chipping Hammers (9)




		Rivet Busters, Chisels and Accessories