Condenser & Heat Exchanger Tube Expanders on Equipment Group Investments, Ltd

Products

Condenser & Heat
Exchanger Tube
Expanders

Boiler Tube Expanders

Tube Rolling Systems

Installation Tools

Tube Removing Tools

Tube Pulling Equipment

Tube Cleaners

Tube Tool Accessories

Pneumatic Tools

Test Pumps

Hoists


All Categories > Condenser & Heat Exchanger Tube Expanders


	Condenser & Heat Exchanger Tube Expanders
	Click on a category to drill down.


		900 Series Condenser & Heat Exchanger Tube Expanders Tube I. D. [min 0.152", 3.86 mm] [max 0.331", 8.41 mm] Tube O. D. [min 1/4", 6.35 mm] [max 3/8", 9.5 mm] Tube Sheet Thickness [min 1/4", 6.3 mm] [max 1-1/4", 31.7 mm]




		1300 Series Condenser & Heat Exchanger Tube Expanders Tube I. D. [min 0.231", 5.87 mm] [max 0.331", 8.41 mm] Tube O. D. [min 3/8", 9.5 mm] [max 3/8", 9.5 mm] Tube Sheet Thickness [min 3/4", 19 mm] [max 3-1/2", 88.9 mm]




		800 Series Condenser & Heat Exchanger Tube Expanders Tube I. D. [min 0.334", 8.48 mm] [max 1.027", 26.9 mm] Tube O. D. [min 1/2", 12.7 mm] [max 1-1/8", 28.5 mm] Tube Sheet Thickness [min 1/2", 12.7 mm] [max 2-1/4", 57.1 mm]




		800-5 Series Condenser & Heat Exchanger Tube Expanders - Five Rolls Tube I. D. [min 0.509", 12.98 mm] [max 1.44", 36.68 mm] Tube O. D. [min 5/8", 15.8 mm] [max 1-1/2", 38.1 mm] Tube Sheet Thickness [min 1/2", 12.7 mm] [max 2-1/4", 57.1 mm]




		1200 Series Condenser & Heat Exchanger Tube Expanders Tube I. D. [min 0.334", 8.48 mm] [max 1.430", 36.32 mm] Tube O. D. [min 1/2", 12.7 mm] [max 1-1/2", 38.1 mm] Tube Sheet Thickness [min 1-1/2", 38.1 mm] [max 6-3/4", 171.4 mm]




		1200-5 Series Condenser & Heat Exchanger Tube Expanders - Five Rolls Tube I. D. [min 0.584", 14.83 mm] [max 1.430", 36.32 mm] Tube O. D. [min 3/4", 19 mm] [max 1-1/2", 38.1 mm] Tube Sheet Thickness [min 1-1/2", 38.1 mm] [max 6-3/4", 171.4 mm]




		F-600 Series Condenser & Heat Exchanger Tube Expanders - Flare Type Tube I. D. [min 0.532", 13.51 mm] [max 0.884", 22.45 mm] Tube O. D. [min 5/8", 15.8 mm] [max 1", 25.4 mm] Tube Sheet Thickness [min 1-1/2", 38.1 mm] [max 2-1/4", 57.1 mm]




		8012 Series Condenser & Heat Exchanger Tube Expanders Tube I. D. [min 0.334", 8.48 mm] [max 1.430", 36.32 mm] Tube O. D. [min 1-3/4", 44.4 mm] [max 3", 76.2 mm] Tube Sheet Thickness [min 1-1/2", 38.1 mm] [max 4", 101.6 mm]




		Refinery Tube Expanders Tube expander for straight rolling or rolling and flaring very thick-walled tubes in cracking furnace tube seats for tubes outside diameter from 50 to 250 mm (2" - 10") and gauges from 6 to 15 mm (0.19" to 0.59"). Flaring 10 to 15 degree. Roll length 38.1 to 101 mm (1-1/2" - 4"). Made on request to drawing of the tube seat.




		Sugar Refinery Expanders These are fixed rolling length special purpose tools which may be power or hand-driven. They are self-feeding parallel-rolling type. When ordering please give precise details of vessel in which the expander is to be used, quoting size and length of tube, distance over tube plates, tube plate thickness and any tube projection details. Ideally a drawing should be provided.




		Linsen Expanders LINSEN - expanders can be power driven by electric drill, pneumatic drill. Designed to produce tube end connections without fittings. Enlarges tube end without distortions or buckling and leaving. 0.015" (0.38 mm) clearance that another tube with the same outside diameter can be inserted and soldered. It is excellent for U-tubes, short bends, for copper, brass aluminium and thin steel tubes. Available from 3/8" (9.5 mm) to 2" (50.8 mm). For more details contact factory.




		Notching & Expanding Expander NE notching&expanding type tube expander for thin tube sheet and thin wall tubes. Expand and notch the tube in one operation. The notches lock the tube in front and back side of the tube sheet and prevent to unseal during the transportation or expanding the near by and already expanded tubes. The expansion range is adjustable within 0.005 mm. Do not need the torque controlled drive.




		Special Tube Expanders




		Baffle Tube Expanders Baffle expanders for tubes from 5/8" to 2".




		Special Tube Expanders "Multi Row" Special expanders with multi row rolls to expand several tube sheets (or baffles) in one operation. Available only in limited diameters and lengths. Made on request only upon drawing of the heat exchangers.